Coolant Hose T-piece for the Rover V8 DAX Rush

by Bob Green

Bottom hose and header feed connector.gif (17001 bytes)

Here is a diagram for a home-made T-piece in stainless steel which allows the expansion tank hose to be plumbed into the radiator bottom hose. The design incorporates a drain point for easy coolant draining.

Bob says: "This one is for the bottom hose assembly. I used a cut down SD1 bottom hose from the pump to the assy and a bendy Halfords hose to the radiator. The 3/4" inch connection goes to the header tank feed."

Click on the thumbnail to view Bob's engineering diagram of the T-piece.